Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts & Accessories

$140.00
The Sturmfist 4 LTR are our bike gloves for winter riding on days when the mercury plunges below 15 degrees F (-9 degrees C). These gloves use superior fabrics and insulation technology to provide unmatched warmth and comfort for your hands. - Durable water-resistant (DWR) distressed goat leather around the hand - Wind- and water-resistant soft shell cuff - Primaloft 8 oz Gold insulation with Cross Core Aerogel technology on back of hand - Primaloft ECO needle insulation with grip control on the palm - Merino wool blend lining made from 35% recycled materials - Drawstring cuff closure
$150.00
The most technically advanced winter cycling pogie, Cobrafist puts unrivaled comfort and control into your hands for expedition in sub-zero conditions. - Two zippered vents for temperature regulation 400g synthetic insulation - Inner pockets for stowage - Bar-end plug attachment - Hook and loop bar closure with integrated donut - Elastic drawstring wrist closure - Reflective graphics - OUTER SHELL: Tear-resistant nylon - LINING: 68D lightweight poly - SUGGESTED TEMPERATURE RANGE: 0°F (-18°C) to 15°F (-9°C) - SIZE: One size (fits flat bars 640mm and wider)
$157.50 - $207.00
From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss
$160.00
The Naughtvind Vest is an essential part of any year-round riding kit. With a stretchy shell material, it’s warm enough for chilly days, but light enough to layer under the Naughtvind jacket on extra-cold days. Pockets, reflective accents, an asymmetrical zipper, and long rear drape make this smart cycling vest a perfect cold-weather riding piece. - Bike-focused design with longer drape in back for riding comfort - Made with 89% recycled materials - Water- and wind-resistant shell material that stretches to move with you - Asymmetrical front zipper to prevent chin rub - Rear pockets for stashing ride essentials - Reflective accents for safety
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
$210.00
We designed the Women’s Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit - Available in Women’s (fitted) and Men’s (straighter) cuts
$215.00
Ragnarök BOA® boots are perfect for the hard-to-predict weather of late fall and early spring. Built to block cold and moisture, these lightweight cycling boots feature a 25ºF+ (-4ºC+) comfort range to keep feet warm and dry through the chill of late autumn and early spring rides. - Free cleat plates for flat-pedal use are available upon request. Please contact brand support at info@45nrth.com - Rated for 25ºF+ (-4ºC+) comfort - Waterproof breathable membrane to manage moisture - Neoprene ankle cuff to keep out moisture and road grit - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Real-rubber outsole with added grip for slippery surfaces - 2-bolt cleat mount ANTI-SLIP MICROGLASS RUBBER A rubber compound electrostatically aligned with microscopic glass fibers to create abrasive protruding shards, increasing friction on slippery surfaces such as ice, wet wood, wet linoleum, and wet metal found on many stairs and floors. WATERPROOF-BREATHABLE MEMBRANE An ultra-thin sheet of microporous material behind our textile shells keeps you dry and warm in the harshest weather conditions. Our waterproof, breathable membranes stop liquid from the outside, but release vapor from the inside for thermal and moisture regulation. BOA CLOSURE Micro-adjustable BOA closure for perfectly dialed fit. LOW CUT NEOPRENE ANKLE Secure closure provides warmth and protection from the elements.
$245.00
Ragnarök Tall is the remedy for cool and wet conditions. Our shoulder-season performance shoe features a waterproof membrane and tall neoprene cuff to regulate moisture and keep out mud and grit. End uncomfortable rides with Ragnarök’s unrivaled weather protection. - A redesigned opening makes Ragnarök easy to put on and take off, and a floating three-finger overflap allows riders to dial in the perfect fit - Ragnarök’s real rubber outsole has an aggressive tread for walking in mud and features a 2-bolt cleat mount - Tall neoprene cuff keeps debris out - Easy on and off - Floating three-finger overflap allows the BOA laces to tighten where they need to for an optimal fit - Imported
$250.00
Naughtvind Bibs balance warmth and breathability for unmatched comfort on cold-weather rides. We use fabric that’s water-, wind-, and abrasion-resistant on the outside and fleece-lined on the inside to keep the elements out and your body heat in. Pockets and reflective accents offer extra functionality and safety. The chamois-less design lets you pair Naughtvind Bibs with your favorite cycling shorts. We designed these winter cycling bibs to layer under our Naughtvind Pants for truly frigid days on the bike. - Chamois-less design for pairing with your favorite chamois shorts - Thermal fleece lining to retain body heat - Breathable mesh back for ventilation - 4/5 length fits with winter boots without bunching - Reflective accents for safety - Pocket storage for ride essentials - Made with sustainable materials
$295.00
In the battle between you and the bitter cold of winter, there’s only one line of defense: 45NRTH’s Naughtvind Jacket. Built for maximum comfort and warmth, our premium jacket finds inspiration in its Doubleweave fabric — a triple-threat of ingenuity designed to breathe, stretch, and protect you from the nastiest of weather. - Doubleweave main fabric provides the best combination of weather protection, breathability & stretch, while grid knit fleece side panels allow even more breathability - Asymmetric zipper prevents chin rub - Special collar shape offers the option for extra face protection in riding position without adding extra bulk - Black reflective material placed in key areas enhances your visibility in low-light situations - Three large, easy-to-access rear pockets to stash ride necessities - Strategically positioned zippered chest pocket avoids interference with pack straps - Zip-closure back ventilation helps dump excess body heat - Silicone taping at bottom hem to hold jacket securely in place
$295.00
The Naughtvind winter cycling jacket shrouds you in supreme comfort on cold rides. High-tech fabrics manage temperature and moisture while they stretch with you. Smart features such as vents, pockets, and reflective accents make every ride easier and safer. We designed this cycling jacket to work perfectly with the rest of our Naughtvind line for the ultimate winter riding system. Face winter head-on with the Naughtvind Jacket. - Bike-focused design with longer drape in back - Asymmetrical zipper to prevent chin rub - Made from 89% recycled materials - Water- and wind-resistant shell material with stretch for riding comfort - Side-body ventilation for temperature management - Zippered and open rear pockets to conveniently stash ride essentials - Reflective accents on arms and rear pockets for safety SPECS: FEATURES - Double-weave main fabric provides the best combination of weather protection, breathability, and stretch - Asymmetric zipper prevents chin rub - Special collar shape offers the option for extra face protection in riding position without adding extra bulk - Silicone taping at bottom hem to hold jacket securely in place - Imported POCKETS - Three large, easy-access rear pockets - Zippered chest pocket - Two zippered front pockets VENTILATION - Zip-closure back ventilation - Grid-knit fleece side panels SUGGESTED TEMP RANGE - 0°F (-18°C) to 25°F (-4°C) Comfort MATERIALS - Shell 1: 88% Recycled Nylon, 12% Elastane - Shell 2: 95% Recycled Polyester, 5% Elastane - Exclusive of trims
$295.00
The Naughtvind winter cycling jacket shrouds you in supreme comfort on cold rides. High-tech fabrics manage temperature and moisture while they stretch with you. Smart features such as vents, pockets, and reflective accents make every ride easier and safer. We designed this cycling jacket to work perfectly with the rest of our Naughtvind line for the ultimate winter riding system. Face winter head-on with the Naughtvind Jacket. - Bike-focused design with longer drape in back - Asymmetrical zipper to prevent chin rub - Made from 89% recycled materials - Water- and wind-resistant shell material with stretch for riding comfort - Side-body ventilation for temperature management - Zippered and open rear pockets to conveniently stash ride essentials - Reflective accents on arms and rear pockets for safety - Available in "Women’s" (more fitted) and "Men’s" (straighter) cuts
$325.00
Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - 0 to 25F / -18 to -4C Comfort
$335.00
45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals
$495.00
Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates
$54.99
The Scraper 3.0 is just as much at home on the bike as in the halfpipe, protecting the BMX rider as reliably as the longboard fan. And, with the optional winter kit, you can get after it in all types of weather. The intelligent ventilation system, with its many inlets and outlets, and the numerous adjustment options that adapt the Scraper 3.0 to each head in a few easy steps, ensure the greatest possible comfort. - ABS hard-shell technology - High visibility due to powerful reflectors - Ponytail compatibility: Helmet well suited to plait wearers - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 4 air outlets - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - Zoom Ace Urban: Finely adjustable fit system with a handy adjustment wheel Sizing: - Medium: 54 – 58cm - Large: 57 – 62cm
$69.99
FOR OFF-ROAD ADVENTURES An ideal off-road helmet for the first rides on uneven terrain. The MoTrip promises a high level of comfort for your rides over hill and dale. The deep fit of the MTB helmet ensures the best possible protection for the head. To make off-road rides more comfortable, the MoTrip is also equipped with the MTB adjustment system. This enable both individual size adjustment and height adjustability using the adjustment wheel at the back of the head. This is a great advantage for ponytail wearers, as they can make room for a ponytail by adjusting the height. Go on off-road adventures with the lightweight and well ventilated bike helmet or alternatively wear it for commuting. - In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Adjustable strap divider - Height-adjustable visor - Ventilation: excellent ventilation through 6 air inlets and 8 air outlets
$84.99
The Hyban 2.0 combines a particularly robust, hard shell with huge air intakes. In combination with the bright, integrated LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility due to reflectors - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for a customizable fit - Large, high-mounted, and integrated LED taillight with 180° visibility Sizing: - Medium: 52-58cm - Large: 56-61cm - X-Large: 58-63cm
$89.99
For maximum safety, the Viantor has the ActiCage structural reinforcement integrated into the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. - ActiCage allows for large ventilation openings without compromising the helmet's safety - Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Zoom Ace fit system with a non-slip adjustment wheel - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and fit - Ponytail-compatible and well suited for braided hairstyles Sizing: - Small: 51 – 55cm - Medium: 52 – 58cm - Large: 58 – 63cm
$99.99
THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility due to reflectors - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility
$99.99
ALLL-ROUND HELMET The Macator is a sporty entry-level helmet for cyclists looking for an outstanding all-round helmet. The Macator has not only a comfortable padding but also offers an excellent ventilation, and it comes in a variety of bright, highly-visible colors. In-Mold: Lightweight, durable helmet with a long-lasting combination of EPS core and Polycarbonate shell - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit
$139.99
THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility
$139.99
FOR MORE SAFETY The ABUS MoDrop MIPS can handle any terrain and any riding style and always leaves you wanting more. The mountain bike helmet is the best companion for big mountain days, experiences on the trail or just leisurely family outings. Equipped with our MTB-specific adjustment system and TriVider webbing distributors, this helmet offers many features that make it more comfortable to wear. The height-adjustable, visor-like visor protects you from hanging branches when riding downhill. In the event of a fall, it can also prevent direct impact with the face. Additional safety is provided by the MIPS impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider webbing distributor - Molded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - Ventilation: excellent ventilation for this helmet type due to 6 air inlets and 8 air outlets - Bug mesh: thorough protection against insects
$139.99
PROFESSIONAL TECHNOLOGY FOR BEGINNERS The Viantor is the high-quality and lightweight helmet for beginners in which we have used many proven technologies from the professional sport. Let yourself be convinced by a high-quality and safe helmet, which has the advantages of a professional race helmet. For maximum safety, the Viantor has the ActiCage structural reinforcement integrated in the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. The ActiCage allows for large ventilation openings without compromising on the helmet's safety. Due to its ponytail compatibility, the Viantor from ABUS is the first choice for riders with long hair. Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Ponytail compatibility: Helmet well suited for braided hairstyles - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - ActiCage: Structural reinforcement integrated in the EPS to optimize stability - Zoom Ace: Fine-adjustable adjustment system with non-slip adjustment wheel for individual fit
$149.99
The MonTrailer offers this increased need for protection and a multitude of well thought-out features for off-road use. This mountain bike helmet is light, extremely well ventilated and extremely comfortable and is perfect for racing or the everyday trail tour. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Good ventilation with 5 air inlets and 7 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - Bottom edge protects the helmet from external influences - ActiCage, a structural reinforcement integrated in the EPS to optimise stability - Zoom Ace adjustment system with non-slip adjustment wheel for individual fit - GoggFit ensures safe positioning of glasses and provides storage space when not in use - The transparent visor gives the wearer good all-round vision without having to take their eyes off the trail
$159.99
The Pedelec 2.0 offers an uncompromising combination of comfort and protection. Complemented by clever features, it is the ideal companion when cycling in road traffic. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Forced Air Cooling Technology ventilation system keeps you cool and comfortable with 4 air inlets and 9 air outlets connected with flow channels - Zoom Ace Urban adjustment system with handy adjustment wheel for a customizable fit - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - High visibility due to powerful reflectors and an integrated LED taillight with 180-degree visibility - Foamed-in fly nets keep insects out - Lower edge protection provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Ponytail-compatible and well suited for braided hairstyles Sizing: - Medium: 52 – 57cm - Large: 56 – 62cm
$169.99
SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets
$189.99
The combination of innovative design, the latest technology, outstanding functionality, maximum ventilation, and low weight make the Aventor a real allrounder. The Aventor is the perfect helmet for cyclists who need a cool head for riding in high temperatures and on challenging stages. - Double shell, in-mold construction for durable fusion of the outer shell with the shock-absorbing helmet material (EPS) - Lower edge protection provides the helmet with additional protection coverage - ActiCage, structural reinforcement integrated into the EPS, optimizes stability - Zoom Ace, fine adjustment system with handy dial provides a personalized fit - Half-surrounding plastic ring connected to adjustment system - Ponytail compatible - Fidlock magnetic strap buckle Sizing: - Small: 51 – 55cm - Medium: 54 – 58cm - Large: 57 – 61cm
$199.99
FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle
$199.99
A HELMET MADE FOR THE CITY STREETS The Pedelec 2.0 is an uncompromising combination of protection and comfort. Complemented by clever features, it is the ideal companion in road traffic. In big city traffic, a helmet is an indispensable companion for you as a cyclist. Accidents happen quickly and if you fall, a bicycle helmet protects you against serious injury. With the Pedelec 2.0, ABUS offers a bicycle helmet that meets the high safety requirements of the big city. Its deep temple area provides the required additional protection. The Pedelec 2.0 is also characterised by the integrated rain hood, which can be quickly pulled over the helmet at the first sign of rain. The especially bright, rechargeable light and the replaceable visor offer additional, passive protection. - This NTA 8776 helmet is a helmet that complies with the requirements in the Dutch Technical Agreement (NTA) 8776. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - High visibility due to powerful reflectors - Large, highly mounted and integrated LED tail light with 180° visibility - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 9 air outlets connected with flow channels - Ponytail compatibility: Helmet well suited to plait wearers - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and form fitting - Foamed-in fly nets - Lower edge protection: Provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Rain cover integrated in the helmet
$249.99
AERODYNAMICS REDEFINED The GameChanger sets new standards. What is a cyclist's biggest enemy? Air resistance. Every cyclist knows that battling against the wind is one of the toughest challenges they face. With its Multi Position Design, the GameChanger redefines aerodynamics. The special shape reduces windage by minimizing exposed surfaces, regardless of weather conditions, head-tilt position and inflow angle. Our innovative Forced Air Cooling Technology sucks in incoming air and channels airflow around the head, creating a perfect climate and keeping your head cool even in hot races. - Multi Position Design: For optimal aerodynamics regardless of head tilt - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - FlowStraps: Aerodynamic, flutter-free and skin-friendly thanks to specially developed strap profile - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit - AirPort: Aerodynamic glasses holder with strap guide - Multi Shell In Mold: For safe shock absorption - Ponytail compatibility: Helmet well suited to plait wearers
$249.99
The GameChanger sets new standards. What is a cyclist's biggest enemy? Air resistance. Every cyclist knows that battling against the wind is one of the toughest challenges they face. With its Multi Position Design, the GameChanger redefines aerodynamics. The special shape reduces air resistance by minimizing exposed surfaces regardless of weather conditions, head-tilt position, and inflow angle. Our innovative Forced Air Cooling Technology sucks in incoming air and channels airflow around the head, creating a perfect climate and keeping your head cool, even in hot races. - Multi Position Design: For optimal aerodynamics regardless of head tilt - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - FlowStraps: Aerodynamic, flutter-free, and skin-friendly thanks to specially developed strap profile - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit - AirPort: Aerodynamic glasses holder with strap guide - Multi Shell In Mold: For safe shock absorption - Ponytail compatibility: Helmet well suited to plait wearers Sizing: - Small: 51 – 55cm - Medium: 52 – 58cm - Large: 59 – 62cm
$299.99
PROTECTED ALL AROUND With the AirDrop, ABUS offers its first full-face helmet that provides the best protection even for your most daring jumps. Enduro racers, downhillers, E-MTB riders and alpine adventurers are always pushing the limits of mountain biking. Increased protection used to mean heavy, hot and claustrophobic full-face helmets. The ABUS AirDrop, by contrast, features ASTM-certified DH safety levels with exceptional ventilation and trail-friendly weight. New technologies like our EVA collarbone protector inserts, breakaway visor attachments and side communication channels bring real benefits to bike parks and the backcountry. If gravity is the thrill you need, the AirDrop is the MTB helmet for you. - In-mould manufacturing for a durable connection to the outer shell with shock-absorbing helmet material (EPS) - Zoom Ace FF: Adjustment system to fit the head circumference - Collarbone protection edges - QUIN ready—easy upgrade with the separately available QUIN chip - Breakaway visor bolts - ASC—ABUS communication channels increase spatial awareness - Breathable cheek pad inserts - Design suitable for spectacles - Double D-ring buckle system - Ventilation: excellent ventilation through 11 air inlets and 6 air outlets
$17.95
- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g
$17.95
- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g
$20.00
• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm
$899.00
Our most popular and versatile model, the Space Horse has become a bit of a cult favorite through its classic styling and ability to handle just about any task or terrain. Ambitious road centuries, gravel grinding, loaded touring, looking great while commuting — the Space Horse is equipped for it all. - 612 Select Tubing – a proprietary blend of 4130 double-butted Chromoly tubes, every piece of tubing on every frame size has been carefully chosen to provide the best ride possible - Geometry — Mix between road and randonneuring with a relatively short rear end and a slightly lower bottom bracket than a standard road bike - 12mm front and rear thru-axles, flat-mount disc brakes - Front and rear rack mounts, fender mounts, and pump peg - Fork features ports for internal Dynamo cable routing - Tire Clearance — 43–61cm frames fit 650b x 47mm (650b x 42mm w/fenders); additionally, 49–61cm frames fit 700c x 45mm (700c x 42mm w/fenders) - Signature custom-cast dropout with replaceable derailleur hanger, signature lugged fork crown and custom fork ends, integrated seat collar, pantographed bottom bracket shell, reinforced bottle bosses for three bottle cages
$999.00
A sweet beast designed for chasing good times, the Gorilla Monsoon builds on All-City’s proven cross geometry to handle camping, dirt touring, and exploring the unknown. Built around 27.5 x 2.4" tires and offered in seven frame sizes, it comfortably accommodates our smallest and tallest riders for long days in the saddle. Features like stealth dropper post routing and full touring mounts round out this elegantly styled steed. - 612 Select Tubing – Selected specifically for sporty handling on the course, comfort on tours, and maximum fun - Geometry – adapted from All-City CX geo, plus the ability to support some load - 73mm bottom bracket allows for a wider chainring option and ample tire clearance - Stealth dropper routing - Tire clearance – 27.5 x 2.4" or 700c x 42mm - Bi-plane fork crown features four-point rack mount and mounts for fender - Flat-mount brakes, front and rear thru-axles, 1-1/8" head tube, All-City Shot Collar, three water bottle mounts - Seven frame sizes: 43, 46, 49, 52, 55, 58, and 61cm
$1,399.00
The Zig Zag is All-City’s answer to what a Modern Endurance Steel Road Bike should be. Elegant and eye-catching, it’s a ripping-fast and efficient machine built to shield the rider from road chatter and unnecessary fatigue. Designed for speed, style, and maximum comfort, the Zig Zag allows riders to go further, faster, and have more fun. - A.C.E. Tubing — Our proprietary heat-treated, air-hardened, extruded steel tubing that we custom designed for riding and racing - Whisky No.9 RD+ carbon fork - A classic road silhouette blends with a contemporary road geo to balance power with comfort for long days in the saddle or attacks off the front - Clearance for 700c x 35mm tires without fenders; 700c x 32mm with fenders - Custom head badge, Signature dropouts, Signature brazed-on seat collar, pump peg, two bottle bosses, and hidden fender mounts
$1,599.00
The Zig Zag is All-City's answer to what a Modern Endurance Steel Road Bike should be. Elegant and eye-catching, it's a ripping-fast and efficient machine built to shield the rider from road chatter and unnecessary fatigue. Designed for speed, style, and maximum comfort, the Zig Zag allows riders to go further, faster, and have more fun. - A.C.E. Tubing — Our proprietary heat-treated, air-hardened, extruded steel tubing that we custom designed for riding and racing - Whisky No.9 RD+ carbon fork - A classic road silhouette blends with a contemporary road geo to balance power with comfort for long days in the saddle or attacks off the front - Clearance for 700c x 35mm tires without fenders; 700c x 32mm with fenders - Custom head badge, Signature dropouts, Signature brazed-on seat collar, pump peg, two bottle bosses, and hidden fender mounts
$1,699.00
The All-City Cosmic Stallion GRX is ready for speedy gravel jaunts and all-day epics. With additional fork-mounted cargo support, this race-ready steel machine sets a new standard for beauty and functionality. Thoroughly modern, classically styled, all on a lightweight disc-brake frameset. - Crafted from All-City's proprietary heat-treated, air-hardened, and custom-extruded A.C.E. steel tubing - Whisky No.9 CXLR Disc 12 Tapered Fork - 12mm thru-axles and flat-mount disc brakes - All-City Signature Sliding 2-For-1 Dropout - Removable All-City fender bridge - Modular external cable routing - Three bottle cages, rear rack mounts, front and rear fender eyelets - Tire Clearance: 700c x 42mm or 650b x 47mm (both with or without fenders) 
$3,299.00
The Cosmic Stallion Titanium Frameset was custom-designed from our proprietary race-focused titanium tubing to be light as a feather for all-road riding, precise handling, and aggressive speed as long as you both shall live. Ready for fast mountain road rides and all-day gravel epics, this bike sets a new standard for beauty and functionality. Thoroughly modern and classically styled for premium ride quality, irresistible fun, and forever durability. - Crafted from All-City's proprietary Oberon Titanium tubing, a blend of 3/2.5 titanium tubes - Premium corrosion resistance - WHISKY No.9 CXLR Disc 12 Tapered Fork - Front triangle internal cable routing - 12mm thru-axles and flat-mount disc brakes - Three bottle cages, rear rack mounts, front and rear fender eyelets - Built with versatility in mind, it accommodates tire sizes 700c x 45mm or 650b x 42mm (both with or without fenders) - Front and Rear Thru Axles - All-City Shot Collar, 31.8, Black
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
$6.00
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$8.99
Brake pad spreader tool for Avid Elixir brakes.
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$12.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$15.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$18.99 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$19.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$19.00 - $34.00
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
$22.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$27.00 - $62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Page 1 of 72 Next page