Accessories Catalog

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.

Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.

Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

- 4-way-stretch woven spandex glove back and articulated fingers for flexibility and fit - Amara palm and double stitch thumb reinforcement for durability - Touch-screen Ax Suede patch - Silicone Gripper palm and fingers provide a superior grip - Neoprene cuff for a comfortable and secure fit

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota

B-RAD Everywhere Base 3

- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel

- Polartec Fleece lining - Waterproof, weather-resistant shell - Adjustable cuffs for varying weather conditions - Three tight mounting positions - Reflective piping and graphics - Front vent zipper - Quick, easy hand access

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- CFD refined integrated bottle with Bento box and computer mount - Articulated straw mount to allow precise angulation and unobtrusive fold-away - Forward computer mount with easy line-of-sight - Included Vision Drop Bottle System and Extension Mount - Metron TFE compatible with adaptor SIZES - 700ml FINISH - Matte black - Color graphics WEIGHT - 335 grams

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

The Moderniste Bottle Cage continues to be a favorite for retro and contemporary bikes. The elegant, minimalist design securely holds a plastic or stainless steel water bottle. This beautifully polished cage is made from lightweight, tubular stainless steel, so it is strong and exceptionally lightweight (43g). The cage can also be squeezed inward or expanded to get the perfect fit for your preferred water bottle.

These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time. The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle. Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made. There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.

SHRED is the high-end performance daypack with an outstanding comfort fit that you bring to your favorite freeride MTB adventures. The pack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me harness system and waist support belt that makes it a super smooth biking backpack that will stay put without cramping your style, even when going downhill or on crazy terrain. - Zero bounce with No Dancing Monkey 2.0 + Snug Me-Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - 25L storage to fit all your gear and tools. - NDM Buckle-Technical buckle for a more secure closure and a better fit ZERO BOUNCE ON THE FREERIDE MOUNTAINBIKE TRAILS With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the No Dancing Monkey™ 2.0 + Snug Me harness you’re going to get the best fitting bike backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system and armor attachment points, makes this MTB backpack perfect for your trail or enduro MTB adventure. PACK YOUR GEAR The SHRED 25 has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles. We even threw in a microfiber cleaner tissue… we thought of everything! Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps. You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style, important on a mountain bike backpack.

FLOW is our high-end Performance mountain bike protector backpack with an integrated and removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. The daypack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me waist support belt that makes the pack totally bounce free on your back without cramping your style. - Zero bounce with NDM2.0 + Snug Me – The No Dancing Monkey 2.0 harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit . - Stay protected – Worry less about falling over and more about how to gain speed with the removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. ZERO BOUNCE ON THE TRAIL MOUNTAINBIKE CRUSADES With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the NDM 2.0 + Snug Me harness you’re going to get the best fitting sports backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system, armor attachment points, and a removable Lev.1CE-Certified by SAS-TEC full back protector that makes this pack perfect for your freeride or enduro bike adventure. CARRY YOUR GEAR The FLOW 25 MTB backpack has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles or personal gadgets. We even threw in a microfiber cleaner tissue, we thought of everything! You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style. STAY HYDRATED Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps.

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.

Topeak's HeadLux helmet light is the Siamese twin of bike lights. This one light does double duty with two super-bright LEDs facing forward and two red LEDs facing the rear. Its 3 modes and wrap around lenses ensure you'll be seen. A nice supplement to your regular light set, the HeadLux is a convenient way to add extra safety to your commute. Plus, batteries are included.