Parts & Accessories

Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features: - Flexible padding adjusts across a wide range of tailgates and a large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications: - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound

This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust-resistant steel design. Features: - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars, or factory racks (sold separately) - Primary watercraft: Kayak

Grab your bikes, put them on the back of your vehicle and go with Thule's Passage rear rack. It's that easy because Thule's innovative Fit Dial easily attaches the Passage to most vehicles and the 6 straps securely hold it in place (straps not shown), while Thule's rubber anti-sway cradles keep your bikes from swaying into each other. You'll also love that the rack arms fold making it super easy to store this rack when it's not in use.

Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch

Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

Smart and functional child bike seat with a personality, designed for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and footstraps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - Easy mounting of the child bike seat on your bike – compatible with most bike models - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Comfortable handlebar for your child's hands during the ride - Water-repellent materials make the seat easy to clean and to keep dry - High quality metal lock that secures the child bike seat to your bike included - Designed and tested for children from 9 months* to 3 years old, up to 33 lbs/15 kg.(*Consult a pediatrician for children under 1 year old.)

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

The MET Rivale MIPS offers superior performance and an aggressive presence on the road that leaves a lasting impression. More safe. More comfortable. More efficient. With its MIPS technology, the Rivale combines an extraordinary price-quality ratio, as well as all the advantages of a brain protection system. MIPS is engineered to add at least 10% extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The Rivale's fit is unparalleled, and thanks to its Safe-T Upsilon retention system the helmet is stable on the head. The 360° head belt ensures that there will be no pressure points on the skull, and the easy to use vertical adjustment provides a customized fit. The front of the helmet is designed with wider and longer vents which improve ventilation and can also serve as a place to securely dock sunglasses. A combination that ensures pure riding fun. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Upsilon Fit System - 360° head belt, and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - Tube-shaped tail to improve aerodynamics - 18 vents are internally engineered with an air channeling system to improve ventilation and comfort - Reflective rear decals to enhance visibility in low-light conditions - Sunglasses ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

A rock-steady classic for road riding. - 18mm inner width - Professional tubeless tape installation included

The SRAM GX Eagle DUB Fat Bike crankset delivers consistent performance every time out. Now featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer, and stronger crankset - Optimized 7000-series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - 76.5mm chainline

Vests are a staple of any cycling kit. From frosty mornings on your local gravel roads to unexpected temperature drops on remote bikepacking trips, these vests pack away easily and retain core warmth when it matters. - Mid–weight four season garment - Wind/water resistant - YKK zipper - 3 full–size rear pockets - Silicone gripper - Reflective tabs

Vests are a staple of any cycling kit. From frosty mornings on your local gravel roads to unexpected temperature drops on remote bikepacking trips, these vests pack away easily and retain core warmth when it matters. - Mid–weight four season garment - Wind/water resistant - YKK zipper - 3 full–size rear pockets - Silicone gripper - Reflective tabs

Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve

This fork mount roof rack can handle any bike. Really. That bike you’re thinking of? Yes. Featuring the 3 Way fork-mount system, the TRIO can handle any bike you own. Top that off with a slim line design, security system, and rugged good looks, and you have the most complete fork-mount rack ever designed. 3 Way Fork Mount System - 3 Way fork mount system can handle any bike you own - Fits 9, 12, 15, & 20 mm forks with size-specific adapters - Adapters included with the TRIO: 9x100, 15x100, and 15x110 - Additional adapters available Additional Details - Easy Fit: Mounts to most factory and all aftermarket cross bars (max crossbar size: 3.5” wide by 1.5” thick) - Carrying capacity: 1 Bike Capacity (45lbs max) - Aerodynamic & Low Profile - Integrated Cable Lock (locks both frame and rear wheel): Style and security all at seven pounds - Sliding rear tire strap - Weight: 7lbs

Forget front derailleurs; SRAM's Rival 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. It combines the durability, simplicity, and efficiency SRAM is know for on the road with their 1x mountain technology, X-Sync. - Single-ring drivetrain simplifies functionality - Forged aluminum with detachable spider: 42T and 52T X-Sync tall, square tooth design provides maximum control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Weight: 799g (24mm spindle, 172.5mm, 42T, no BB)

SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.

- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents

The Edelux is Wilfried Schmidt's new LED headlight. It's compatible with all modern 6 volt hub dynamos. This headlight is almost entirely hand made by Schmidt, with the exception of the wonderful IQ-TEC mirror, which is made by Busch & Müller, and of course the three watt LED itself. Since heat is the big enemy of LED headlights, the LED in the Edelux is mounted on a large and heavy copper heat sink. This keeps the LED cool, and results in a very low operating temperature, and a very bright headlight, the brightest dynamo headlight I have ever seen. Like the E6, it uses a magnetic reed switch for high reliability. The switch has On, Off and Senso positions. On Senso, the light switches itself on or off as conditions require. The standlight remains on for up to four minutes after you stop, depending on how long you've been riding. The Edelux does not have a built in reflector.

The Shimano GRX BL-RX600 shifter offers greater rider control for mixed-terrain riding thanks to Shimano's category-leading hydraulic disc brakes. Lighter shift action and gravel-specific ergonomic shape offer more control on bumpy terrain. - Gravel-inspired lever and bracket ergonomics - Anti-slip brake lever - Greater mixed-terrain control - Designed to be used with a 1x gear setup

With the evolution of disc brakes on time trial bikes, TRP saw the need for a high-performance hydraulic TT disc brake resulting in the all-new HD-T910. We took a unique approach to the time trial brake by combining speed and style which resulted in the TT Hydro. Initially, the lever was handcrafted from clay before being finished off in aluminum. This allowed our designers to offer maximum ergonomics and an elegant visual appearance. From there it was forged from alloy, given a replaceable rubberized grip, and finished off with a carbon lever blade. The lever is matched to a black flat mount caliper designed to offer controlled braking at any speed. The levers come in two widths for differing bar diameters: - For bars measuring a diameter between 22-24 mm: HD-T910 - For bars measuring a diameter between 24-25 mm: HD-T912 - HD-T910 (OD 22-24 mm) - HD-T912 (OD 24-25 mm) - Carbon Fiber Lever Blade - Forged Alloy Lever Body - TRP 2-Piston Flat Mount Caliper - Integrated and Replaceable Grip - Anodized Black - 5.0 mm High Quality Hose with 1900 mm length - Factory Pre-Bled with EZ-Plug System - Blip or Di2 Shifter Adapter Inserts Available - Top Loading Pad Design - 390g (front) - Minimum bar insertion is 55mm

A part time universal gear integrated in the handle of the screwdriver significantly increases the working speed. The turbo function can either be switched on or off by pressing a button. Turning it off is recommended for fine adjustment and final tightening or loosening of a high torque screw. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward—allowing single-hand operation. - Quadruples the screwdriving speed in a purely mechanical way (without battery) - Activation and deactivation of the turbo function by a simple push of a button - The fixable universal gear allows powerful screwdriving and easy fine adjustments - Robust, maintenance-free gear made of steel (maximum torque 14 Nm) - 1/4" hexagon take-up with Rapidaptor quick-release chuck

G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And, of course, the signature Guide lever-feel and contact-point adjustability ensures that this brake works great for every rider. The G2 RSC presents a rider-oriented offering with an alloy blade, lever pivot bushings, stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride. - We added stiffness in the caliper and a new pad compound that offers more bite to really deliver the Mini-Code feel. - Engineered for easy installation

Park's Home Mechanic Wheel Truing Stand allows extremely accurate and reliable wheel truing and even building at an economical price. It's constructed from heavy-gauge steel and works with most wheel sizes and hub widths. It can be bolted to a bench for additional stability.

The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)

Designed with the speed of pro riders in mind, the Bluegrass Rogue Core MIPS is sharp, bold, and alternative. It's designed to properly protect the most sensitive head areas, the back, and the temples. - The Rogue Core Mips exceeds worldwide certifications and performs best at both linear and rotational impact thanks to its meticulously engineered EPS shell and the MIPS-C2® brain protection system attached inside the helmet - The visor is designed to enhance safety and protect from branches - In the event of a crash, the visor will adapt to the shell of the helmet to help withstand extra rotational forces transferred to the neck - The Safe-T Heta retention system provides an exceptional fit and keeps the helmet stable on the head - The 360° head belt ensures that there are no pressure points on the skull, while vertical adjustments provide a custom fit - The edge at the back of the helmet is designed to properly keep the goggle strap in place - Sunglasses can be securely docked into the two visor vents - The straps anchors are embedded into the EPS and you can quickly fasten them thanks to the Fidlock® magnetic buckle, even while wearing gloves

The latest jacket to join the best-selling REFLECT360 range that is now sold in over 40 countries, the REFLECT360 CRS (Color Reflective System) cycling jacket, is the world's first cycling jacket that comes in 6 vibrant colors and looks stylish and unassumingly "normal" by day. But, thanks to our innovative, 100% reflective material, it lights up when caught in a vehicle's headlights at night. This jacket takes innovation in the cycling apparel market to a new level. The REFLECT360 CRS cycling jacket incorporates multiple vents—front, shoulder/back, and underarm. This allows the user to regulate body temperature. By opening the front zipper vents, a "through-flow" is achieved. The air enters the front vents, cools the body, and exits via the shoulder/back vents. During the winter, the vents can be closed and are designed to also be used as extra pockets, if required. These features enable the jacket to be used all year round. The jacket also has an inside chest pocket and large lower back pocket to store an extra layer or a map. About the fabric: The material has millions of tiny reflective beads embedded in the material so when a vehicle's headlights hit it, the beads reflective the light back to the light source, meaning the driver should be able to identify the cyclists further in advance than normal and maneuver appropriately. - High-visibility yellow jacket that reflects a brilliant white when struck by light - Built-in air vents to keep ventilated (front, under-arm, and shoulder/back) - Fleece-lined comfort collar - Adjustable waistband and hook-and-loop cuff - Waterproof with sealed seams and storm zipper - Inside mesh lining for added comfort - Low-profile rear spray guard - Inside chest & back pockets

The combination of innovative design, the latest technology, outstanding functionality, maximum ventilation, and low weight make the Aventor a real allrounder. The Aventor is the perfect helmet for cyclists who need a cool head for riding in high temperatures and on challenging stages. - Double shell, in-mold construction for durable fusion of the outer shell with the shock-absorbing helmet material (EPS) - Lower edge protection provides the helmet with additional protection coverage - ActiCage, structural reinforcement integrated into the EPS, optimizes stability - Zoom Ace, fine adjustment system with handy dial provides a personalized fit - Half-surrounding plastic ring connected to adjustment system - Ponytail compatible - Fidlock magnetic strap buckle Sizing: - Small: 51 – 55cm - Medium: 54 – 58cm - Large: 57 – 61cm

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearing & double seal system

Technical Details: - Comfort fit - Bounder upper all seamless for comfort to prevent pressure points - New BOA Li2 micro-adjustment - Integrated X-Comfort Zone for a large range of feet width - Power Zone technology for better ankle support and stability to prevent adjustment - Carbon-injected/nylon outsole Ergo Grip 2 with improved traction on rocks - Removable studs for better traction in hard conditions - EVA insoles for better shock absorption - 12oz / 340g (size 42)

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available