Lighting

Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!

This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams

The 65R is the Superflash tail light on steroids. The Cree XBD LED delivers 65 lumens of brilliance and 220° of visibility to get you noticed day and night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 7 hrs (high – 30 lm), 12 hrs (low – 7 lm), 5.5 hrs (Courtesy - 13-40 lm) and up to 11.5 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP65 standard - 550 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Smart Charging Technology with built-in low battery indicator - Includes Quick Strap seat post mount - 52 grams

Maximize your visibility with this amazing taillight. Planet Bike's Superflash aims a one-watt Power LED plus two red LEDs for light that can be seen for up to one mile! The ultra-compact case is weatherproof, light and durable. And, the Superflash Turbo includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.

Planet Bike's Superflash/Blaze Combo Light Set is a commuter's dream that maximizes your visibility on dark, moonless nights. The Blaze boasts a Nichia half-watt white LED with a brilliant beam specifically designed not only to be seen, but also to let you see where you're going. The Super Flash aims 2 LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! They both feature flashing and steady modes, include batteries and deliver run times of up to 100 hours.

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge. - 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs) - UV Proof rubber mount  - Double-click lens to turn on/off - Micro USB charge cord included - Weatherproof exterior for all season riding - Weight: 73 g (2.6 oz)

Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)

The City Rover is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance to the front and side for up to 20 hours of ride time. The City Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. - Additional 15 minutes in low-power safety mode after low-battery indicator light comes on - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - 5 Modes (burn time): Steady High 700 Lumens 2 hours, Steady Medium 350 Lumens 4 hours, Steady Low 200 - Lumens 8 hours, Pulse 600 Lumens 16 hours, Daytime Flash 600 Lumens 36 hours

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty

The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h) - Seatstay mount included - UV-proof rubber strap bracket for easy on and off included - Includes Micro USB-recharging cord

The PDW Kepler E-Bike Headlight works with any 6V-15V e-bike system, and it comes packed with 350 lumens and a sturdy stainless steel fork mount. The Kepler E-bike Headlight comes equipped with a Bosch-friendly plug pre-installed for quick attachment to any Bosch e-bike system. For other e-bike installations, the Bosch plug can simply be clipped off, and the light functions just the same directly wired up. - Works with 6-15V systems - Mounts to fork crown with steel bracket - Features a cut-off beam to not blind oncoming riders

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

This PDW light set consists of the Pathfinder 200 lumen USB-rechargeable headlight and the Io USB-rechargeable taillight. The Pathfinder 200 has a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - Headlight: 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Headlight: Vertical Cutoff Beam focuses beam into perfect bike path pattern while shielding the LED to prevent blinding oncoming traffic - Taillight: Mounts vertically or horizontally - Taillight: 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h)

Portland Design Works' Spaceship 3 Headlight/Radbot 500 Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The RADBOT 500 is equipped with a blazing 0.5 watt LED and a large precision reflector to provide visibility to your backside. Powered by 2xAAA batteries, the RADBOT has three modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time. It also features an on/off switch that must be depressed for 1.5 seconds to turn the light on and off. This helps prevent the RADBOT from being accidentally turned on when you're transporting it in your pocket or bag off the bike. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing   - Weatherproof exterior for all season riding - Includes Mission Control 2.0 mount  - Weight: 91 g (3.2 oz) - Lifetime PDWarranty Radbot 500: - 0.5 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

Lezyne Ebike Classic Stvzo E500 Headlight; An advanced StVZO certified e-bike cycling headlight. This light is housed in a high-quality machined aluminum body with computerized thermal management to maximize lumen output efficiency. Running on cutting-edge programming, this light offers up to an impressive 500 lumens of output. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w. Download the manual below for further installation and compatibility. - 500 lumen - STVZO optimized lens - 130cm cable - Forward center mount and hardware

Lezyne Ebike Super E1000 Headlight: One of the most powerful and advanced StVZO certified e-bike cycling headlights, this light is housed in an expertly machined aluminum body with cooling fins that are engineered to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—600 lumens or 1000 lumens—on-the-go via a handlebar mounted button. Thermal management is built into the programming, and it comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 8.5w LB / 16w HB. Download the manual below for further installation and compatibility details. - 600 lumen with 1000 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount, forward center mount, and hardware

Compact, super-lightweight USB rechargeable LED cycling safety light. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of bar sizes. Five output modes offer up to 15 lumens and the custom Wide Angle Optics lens provides up to 270° of visibility. The Femto USB Front can run for up to 20 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility. Specs - Max Lumens: 15 - Weight: 22g - Max Runtime: 22 hours - Recharge Time: 2:30